Fitting Specifications & Terms

Preparation

• Unless otherwise stated in writing, you are responsible for the removal and replacement of curtains, blinds, pelmets, the lifting and refitting of carpets and the repositioning of telephone or burglar alarm fittings to enable the goods to be installed.

• If you instruct us to remove and/or re-erect blinds or curtains, we will take reasonable care when doing this, but any such works are taken at your risk and we shall not be responsible for the operation or condition of the blinds and/ or curtains once fitted and/or stored.

• Existing doors, windows and frames being replaced will be cleared from the Site unless specifically requested. We do not guarantee that we can remove these so that they may be re-used elsewhere.

• Please ensure we have safe access to all areas to enable us to carry out the installation services.

• Please ensure we have free access to water and power when requested by us.

• If we need to undertake subsequent visits to carry out remedial work due to our acts or omissions or the acts or omissions of our third-party suppliers, we shall contact you to arrange a convenient time for such work to be undertaken.

 

About The Survey

In order for our survey for all apertures to be carried out:

• Window systems should be satisfactorily complete (including, but not limited to, having a masonry sill present with a reveal either side and a fixed lintel across the head of such aperture). If we determine that a window aperture is incomplete/incorrectly formed to the extent that we cannot accurately complete the survey we will reschedule the survey at a time that suits both parties.

• Floor systems should be at least to a screed level finish. If it is not possible to obtain an accurate floor level measurement you must provide a datum in respect of an existing floor level within the property and you take full responsibility for these measurements If we determine that this is not sufficiently accurate, we reserve the right to reschedule the survey until such time that the apertures are of a satisfactory standard.

• Rooflight systems must be pre-formed and In the event that the survey is not able to be carried out you must either: a) provide a final size dimensions and take full responsibility for these measurements; or b) reschedule the Survey until such time that the apertures are of a satisfactory standard.

 

Additional/General Info for Installation

• All openings must be prepared exactly in accordance with the dimensions detailed in the confirmation forms

• Opening must be true/level with max tolerance deviation of no more than 1mm per metre along axis

• Cavity closures or vertical damp proofs must be in position prior to installation

• Any existing partition, temporary boarding or obstruction should be removed prior to start of installation

• The Purchaser will provide suitable access for the installation of our works in full accordance with current Health and Safety Regulations i.e. mobile access platforms and fixed scaffolding is fully boarded with guard rails (including any necessary adaptations)

• All external scaffolding must be removed or set back a minimum of 1100mm from opening

• Dry and secure area, if required on larger installations, must be provided

• External render finishes to framework must be carried out after installation

• Internal plaster finishes to framework must be carried out after installation